Difference between revisions of "Installation"

Latest revision as of 01:56, 30 September 2023

criu is an utility to checkpoint/restore a process tree. This page describes how to get CRIU binary on your box.

Installing from packages[edit]

Many distributions provide ready-to-use packages. If no, or the CRIU version you want is not yet there, you will need to get CRIU sources and compile it.

Obtaining CRIU sources[edit]

You can download the source code as a release tarball or sync the git repository. If you plan to modify CRIU sources (e.g. to contribute the code back) the latter way is highly recommended. The latest and greatest sources are:

Tarball:	criu-4.0.tar.gz
Version:	4.0 "CRIUDA"
Released:	20 Sep 2024
GIT tag:	v4.0

Installing build dependencies[edit]

Compiler and C Library[edit]

CRIU is mostly written in C and the build system is based on Makefiles. Thus just install standard gcc and make packages (on Debian use build-essential).

For building with 32bit tasks C/R support you will need libc6-dev-i386, gcc-multilib instead of gcc.

Cross-compilation for ARM is also possible.

Protocol Buffers[edit]

CRIU uses the Google Protocol Buffers to read and write images. The protoc tool is used at build time and CRIU is linked with the libprotobuf-c.so. Also CRIT uses python bindings and the descriptor.proto file which typically provided by a distribution's protobuf development package.

RPM packages: protobuf protobuf-c protobuf-c-devel protobuf-compiler protobuf-devel protobuf-python

Deb packages: libprotobuf-dev libprotobuf-c-dev protobuf-c-compiler protobuf-compiler python3-protobuf

Optionally, you may build protobuf from sources.

Other stuff[edit]

pkg-config to check on build library dependencies.
python-ipaddress is used by CRIT to pretty-print IP addresses and is also required by zdtm.py
libbsd-devel (RPM) / libbsd-dev (DEB) If available, CRIU will be compiled with setproctitle() support and set verbose process titles on service workers.
iproute2 version 3.5.0 or higher is needed for dumping network namespaces. The latest one can be cloned from iproute2. It should be compiled and a path to ip set as the CR_IP_TOOL variable
nftables (RPM) / libnftables-dev (DEB) If available, CRIU will be compiled with nftables C/R support
libcap-devel (RPM) / libcap-dev (DEB) - Require
libnet-devel libnl3-devel (RPM) / libnet1-dev (DEB) / libnl-3-dev libnet-dev (Ubuntu) - Require
libaio-devel (RPM) / libaio-dev (DEB) is needed to run tests
gnutls-devel (RPM) / libgnutls28-dev (DEB), if available, CRIU will be compiled with TLS support
python2-future or python3-future is now needed for zdtm.py tests launcher
libdrm-devel (RPM) / libdrm-dev (DEB) If available, CRIU will be compiled with support for AMD GPUs.

For APT use the --no-install-recommends parameter is to avoid asciidoc pulling in a lot of dependencies. Also read about ZDTM test suite if you will run CRIU tests, those sources need other deps.

Building the tool[edit]

Simply run make in the CRIU source directory. This is the standard way, but there are some options available.

There's a docker-build target in Makefile which builds CRIU in Ubuntu Docker container. Just run make docker-build and that's it.
CRIU has functionality that is either optional or behaves differently depending on the kernel CRIU is running on. By default build process includes maximum of it, but this behavior can be changed.
You may specify build dependencies by hands

Installing[edit]

CRIU works perfectly even when run from the sources directory (with the ./criu/criu command), but if you want to have in standard paths run make install. You may need to install asciidoc and xmlto packages to make install-man work.

Checking That It Works[edit]

Linux kernel v3.11 or newer is required, with some specific config options turned on. Various advanced CRIU features might require even newer kernel. So the first thing to do is to check the kernel by running criu check. At the end it should say "Looks OK", if it doesn't the messages on the screen explain what functionality is missing. If your distribution does not provide needed kernel, you might want to compile one yourself.

You can then try running the ZDTM Test Suite which sits in the test/zdtm/ directory.

@@ Line 1: / Line 1: @@
-<code>criu</code> is an utility to checkpoint/restore a process tree. This page describes how to manually build and install prerequisites and the tool itself.
+<code>criu</code> is an utility to checkpoint/restore a process tree. This page describes how to get CRIU binary on your box.
 == Installing from packages ==
-Some distributions provide ready-to-use [[packages]]. If no, or the CRIU version you want is not yet there, you will need to get CRIU sources and compile it.
+Many distributions provide ready-to-use [[packages]]. If no, or the CRIU version you want is not yet there, you will need to get CRIU sources and compile it.
-== Obtaining CRIU Source ==
+== Obtaining CRIU sources ==
-You can download the source code as a [https://download.openvz.org/criu/ release tarball] or sync the [https://github.com/xemul/criu git repository]. If you plan to modify CRIU sources (e.g. to [[How to submit patches|contribute the code back]]) the latter way is highly recommended. The latest and greatest sources are: {{Latest release}}
+You can download the source code as a [https://download.openvz.org/criu/ release tarball] or sync the [https://github.com/checkpoint-restore/criu git repository]. If you plan to modify CRIU sources (e.g. to [[How to submit patches|contribute the code back]]) the latter way is highly recommended. The latest and greatest sources are: {{Latest release}}
-== Build dependencies ==
+== Installing build dependencies ==
 === Compiler and C Library ===
@@ Line 21: / Line 21: @@
 === Protocol Buffers ===
-CRIU uses the [https://developers.google.com/protocol-buffers/ Google Protocol Buffers] to read and write [[images]] and thus requires [https://github.com/protobuf-c/protobuf-c C language bindings]. The <code>protoc</code> tool is required at build time and the <code>libprotobuf-c.so</code> shared object is required at build and run time. [[CRIT]] also uses python language bindings for protocol buffers and requires the <code>descriptor.proto</code> file typically provided by a distribution's protobuf development package.
+CRIU uses the [https://developers.google.com/protocol-buffers/ Google Protocol Buffers] to read and write [[images]]. The <code>protoc</code> tool is used at build time and CRIU is linked with the <code>libprotobuf-c.so</code>. Also [[CRIT]] uses python  bindings and the <code>descriptor.proto</code> file which typically provided by a distribution's protobuf development package.
 ; RPM packages
-: <code>protobuf protobuf-c protobuf-c-devel protobuf-compiler protobuf-devel protobuf-python</code>
+: <code>protobuf protobuf-c protobuf-c-devel protobuf-compiler protobuf-devel protobuf-python </code>
-; Debian packages
+; Deb packages
-: <code>libprotobuf-dev libprotobuf-c0-dev protobuf-c-compiler protobuf-compiler python-protobuf</code>
+: <code>libprotobuf-dev libprotobuf-c-dev protobuf-c-compiler protobuf-compiler python3-protobuf</code>
-; Ubuntu packages
+Optionally, you may [[build protobuf]] from sources.
-: <code>libprotobuf-dev libprotobuf-c0-dev protobuf-c-compiler protobuf-compiler python-protobuf</code>
-Optionally, you may [[build protobuf]] from sources.
+=== Other stuff ===
-=== Other deps ===
 * <code>pkg-config</code> to check on build library dependencies.
-* <code>python-ipaddr</code> is used by CRIT to pretty-print ip.
+* <code>python-ipaddress</code> is used by CRIT to pretty-print IP addresses and is also required by zdtm.py
-* <code>libbsd</code>. If available, CRIU will be compiled with <code>setproctitle()</code> support. It will allow to make process titles of service workers to be more verbose.
+* <code>libbsd-devel</code> (RPM) / <code>libbsd-dev</code> (DEB) If available, CRIU will be compiled  with <code>setproctitle()</code> support and set verbose process titles on service workers.
-* <code>iproute2</code> version 3.5.0 or higher is needed for dumping network namespaces. The latest one can be cloned from [http://git.kernel.org/?p=linux/kernel/git/shemminger/iproute2.git;a=summary iproute2]. It should be compiled and a path to ip written in the environment variable <code>CR_IP_TOOL</code>.
+* <code>iproute2</code> version 3.5.0 or higher is needed for dumping network namespaces. The latest one can be cloned from [http://git.kernel.org/?p=linux/kernel/git/shemminger/iproute2.git;a=summary iproute2]. It should be compiled and a path to ip set as the [[environment variables|<code>CR_IP_TOOL</code> variable]]
-* <code>libcap-devel</code> (RPM) / <code>libcap-dev</code> (DEB)
+* <code>nftables</code> (RPM) / <code>libnftables-dev</code> (DEB) If available, CRIU will be compiled with nftables C/R support
-* <code>libnet-devel libnl3-devel</code> (RPM) / <code>libnet1-dev</code> (DEB) / <code>libnl-3-dev libnet-dev</code> (Ubuntu)
+* <code>libcap-devel</code> (RPM) / <code>libcap-dev</code> (DEB) - Require
+* <code>libnet-devel libnl3-devel</code> (RPM) / <code>libnet1-dev</code> (DEB) / <code>libnl-3-dev libnet-dev</code> (Ubuntu) - Require
-For APT use "--no-install-recommends" parameter is to avoid asciidoc pulling in a lot of dependencies.
+* <code>libaio-devel</code> (RPM) / <code>libaio-dev</code> (DEB) is needed to run tests
-Also read about [[ZDTM test suite]] if you want to run CRIU tests.
+* <code>gnutls-devel</code> (RPM) / <code>libgnutls28-dev</code> (DEB), if available, CRIU will be compiled with [[TLS]] support
+* <code>python2-future</code> or <code>python3-future</code> is now needed for zdtm.py tests launcher
-== Linux Kernel ==
+* <code>libdrm-devel</code> (RPM) / <code>libdrm-dev</code> (DEB) If available, CRIU will be compiled with support for AMD GPUs.
-Linux kernel v3.11 or newer is required, with some specific options set. Various CRIU features might require even newer kernel. If your distribution does not provide needed kernel, you might want to [[Linux kernel|compile one yourself]]. Criu can [[check the kernel]] features presence.
-== Building CRIU From Source ==
-=== Native Compilation ===
-Simply run <code>make</code> in the CRIU source directory.
-=== Compilation in Docker container ===
-There's a ''docker-build'' target in Makefile which builds CRIU in Ubuntu Docker container. Just run <code>make docker-build</code> and that's it.
-=== Non-standard compilation ===
-<div class="toccolours mw-collapsible mw-collapsed" style="width:800px">
+For APT use the <code>--no-install-recommends</code> parameter is to avoid asciidoc pulling in a lot of dependencies.
-Building natively, but specifying built dependencies manually
+Also read about [[ZDTM test suite]] if you will run CRIU tests, those sources need other deps.
-<div class="mw-collapsible-content">
- cd deps
- rsync -a --exclude=.git --exclude=deps .. criu-`uname -m`
- cd criu-`uname -m`
- make \
-   USERCFLAGS="-I`pwd`/../`uname -m`-linux-gnu/include -L`pwd`/../`uname -m`-linux-gnu/lib" \
-   PATH="`pwd`/../`uname -m`-linux-gnu/bin:$PATH"
- sudo LD_LIBRARY_PATH=`pwd`/../`uname -m`-linux-gnu/lib ./criu check
- cd ../..
-</div>
-</div>
-<div class="toccolours mw-collapsible mw-collapsed" style="width:800px">
+== Building the tool ==
-Cross Compilation for ARM
-<div class="mw-collapsible-content">
-ARMv7
- cd deps
- rsync -a --exclude=.git --exclude=deps .. criu-arm
- cd criu-arm
- make \
-   ARCH=arm \
-   CROSS_COMPILE=`pwd`/../`uname -m`-linux-gnu/bin/arm-linux-gnueabihf- \
-   USERCFLAGS="-I`pwd`/../arm-linux-gnueabihf/include -L`pwd`/../arm-linux-gnueabihf/lib" \
-   PATH="`pwd`/../`uname -m`-linux-gnu/bin:$PATH"
- cd ../..
-ARMv8
+Simply run <code>make</code> in the CRIU source directory. This is the standard way, but there are some options available.
-  cd deps
-  rsync -a --exclude=.git --exclude=deps .. criu-aarch64
-  cd criu-aarch64
-  make \
-   ARCH=aarch64 \
-   CROSS_COMPILE=`pwd`/../`uname -m`-linux-gnu/bin/aarch64-linux-gnu- \
-   USERCFLAGS="-I`pwd`/../aarch64-linux-gnu/include -L`pwd`/../aarch64-linux-gnu/lib" \
-   PATH="`pwd`/../`uname -m`-linux-gnu/bin:$PATH"
-  cd ../..
-</div>
-</div>
-=== Configuration ===
+# There's a ''docker-build'' target in Makefile which builds CRIU in Ubuntu Docker container. Just run <code>make docker-build</code> and that's it.
+# CRIU has functionality that is either optional or behaves differently depending on the kernel CRIU is running on. By default build process includes maximum of it, but this behavior [[configuring|can be changed]].
+# You may [[Manual build deps|specify build dependencies by hands]]
-CRIU has functionality that is either optional or behaves differently depending on the kernel CRIU is running on. By default build process includes maximum of it, but this behavior can be changed.
+== Installing ==
-''Main article: [[Configuring]]''
+CRIU works perfectly even when run from the sources directory (with the <code>./criu/criu</code> command), but if you want to have in standard paths run <code>make install</code>. You may need to install <code>asciidoc</code> and <code>xmlto</code> packages to make install-man work.
-== Installation ==
-CRIU works perfectly even when run from the sources directory (with the "./criu" command), but if you want to have in standard paths run <code>make install</code>.
-You may need to install the following packages to generate docs in Debian-based OS's to avoid errors from install-man:
-* <code>asciidoc</code>
-* <code>xmlto</code>
 == Checking That It Works ==
-First thing to do is to run <code>criu check</code>. At the end it should say "Looks OK", if it doesn't the messages on the screen explain what functionality is missing.
+Linux kernel v3.11 or newer is required, with some specific config options turned on. Various advanced CRIU features might require even newer kernel.  So the first thing to do is to [[Checking the kernel|check the kernel]] by running <code>criu check</code>. At the end it should say "Looks OK", if it doesn't the messages on the screen explain what functionality is missing. If your distribution does not provide needed kernel, you might want to [[Linux kernel|compile one yourself]].
-Some kernel functionality is required in rare cases and may not block the dump (but sometimes may). These features can be checked by adding the <code>--extra</code> flag.
-If you're using our custom kernel, then the <code>--all</code> option can be used, in this case CRIU would check for ''all'' the kernel features to work.
-You can then try running the [[ZDTM Test Suite]] which sits in the <code>tests/zdtm/</code> directory.
+You can then try running the [[ZDTM Test Suite]] which sits in the <code>test/zdtm/</code> directory.
 == Further reading ==
-* [[Checking the kernel]]
 * [[Usage]]
 * [[Advanced usage]]
@@ Line 132: / Line 73: @@
 [[Category:HOWTO]]
+[[Category:Editor help needed]]