Docker

This HOWTO page describes how to checkpoint and restore a Docker container.

Introduction

Docker wants to manage the full lifecycle of processes running inside one if its containers, which makes it important for CRIU and Docker to work closely together when trying to checkpoint and restore a container. This is being achieved by adding the ability to checkpoint and restore directly into Docker itself, powered under the hood by CRIU. This integration is a work in progress, and its status will be outlined below.

Docker Experimental

Checkpoint & Restore is now available in the _experimental_ runtime mode for Docker. Simply start your docker daemon with --experimental to enable the feature.

Dependencies

In addition to installing version 1.13 of Docker, you need CRIU installed on your system, with at least version 2.0. You also need some shared libraries on your system. The most likely things you'll need to install are libprotobuf-c and libnl-3. Here's an output of ldd on my system:

$ ldd `which criu`
   	linux-vdso.so.1 =>  (0x00007ffc09fda000)
   	libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007fd28b2c7000)
   	libprotobuf-c.so.0 => /usr/lib/x86_64-linux-gnu/libprotobuf-c.so.0 (0x00007fd28b0b7000)
   	libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007fd28aeb2000)
   	libnl-3.so.200 => /lib/x86_64-linux-gnu/libnl-3.so.200 (0x00007fd28ac98000)
   	libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007fd28a8d3000)
   	/lib64/ld-linux-x86-64.so.2 (0x000056386bb38000)
   	libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007fd28a5cc000)

checkpoint

There's a top level checkpoint sub-command in Docker, which lets you create a new checkpoint, and list or delete an existing checkpoint. These checkpoints are stored and managed by Docker, unless you specify a custom storage path.

Here's an example of creating a checkpoint, from a container that simply logs an integer in a loop.

First, we create container:

$ docker run -d --name looper --security-opt seccomp:unconfined busybox  \
         /bin/sh -c 'i=0; while true; do echo $i; i=$(expr $i + 1); sleep 1; done'

You can verify the container is running by printings its logs:

$ docker logs looper

If you do this a few times you'll notice the integer increasing. Now, we checkpoint the container:

$ docker checkpoint create looper checkpoint1

You should see that the process is no longer running, and if you print the logs a few times no new logs will be printed.

restore

Unlike creating a checkpoint, restoring from a checkpoint is just a flag provided to the normal container start call. Here's an example:

$ docker start --checkpoint checkpoint1 looper

If we then print the logs, you should see they start from where we left off and continue to increase.

Restoring into a new container

Beyond the straightforward case of checkpointing and restoring the same container, it's also possible to checkpoint one container, and then restore the checkpoint into a completely different container. This is done by providing a custom storage path with the --checkpoint-dir option. Here's a slightly revised example from before:

$ docker run -d --name looper2 --security-opt seccomp:unconfined busybox \
         /bin/sh -c 'i=0; while true; do echo $i; i=$(expr $i + 1); sleep 1; done'

# wait a few seconds to give the container an opportunity to print a few lines, then
$ docker checkpoint create --checkpoint-dir=/tmp looper2 checkpoint2

$ docker create --name looper-clone --security-opt seccomp:unconfined busybox \
         /bin/sh -c 'i=0; while true; do echo $i; i=$(expr $i + 1); sleep 1; done'

$ docker start --checkpoint-dir=/tmp --checkpoint=checkpoint2 looper-clone

You should be able to print the logs from looper-clone and see that they start from wherever the logs of looper end.

usage

Checkpoint

 # docker checkpoint create --help
 Usage:	docker checkpoint create [OPTIONS] CONTAINER CHECKPOINT

 Create a checkpoint from a running container

 Options:
     --checkpoint-dir string   Use a custom checkpoint storage directory
     --help                    Print usage
     --leave-running           Leave the container running after checkpoint

Restore

  # docker start --help
  Usage:	docker start [OPTIONS] CONTAINER [CONTAINER...]

 Start one or more stopped containers

 Options:
 -a, --attach                  Attach STDOUT/STDERR and forward signals
     --checkpoint string       Restore from this checkpoint
     --checkpoint-dir string   Use a custom checkpoint storage directory
     --detach-keys string      Override the key sequence for detaching a container
     --help                    Print usage
 -i, --interactive             Attach container's STDIN

Integration Status

CRIU has already been integrated into the lower level components that power Docker, namely runc and containerd. The final step in the process is to integrate with Docker itself. You can track the status of that process in this pull request.

Compatibility Notes

The latest versions of the Docker integration require at least version 2.0 of CRIU in order to work correctly. Additionally, depending on the storage driver being used by Docker, and other factors, there may be other compatibility issues that will attempt to be listed here.

TTY

Checkpointing an interactive container is currently not supported.

Seccomp

You'll notice that all of the above examples disable Docker's default seccomp support. In order to use seccomp, you'll need a newer version of the Kernel. **Update Needed with Exact Version**

OverlayFS

There is a bug in OverlayFS that reports the wrong mnt_id in /proc/<pid>/fdinfo/<fd> and the wrong symlink target path for /proc/<pid>/<fd>. Fortunately, these bugs have been fixed in the kernel v4.2-rc2. The following small kernel patches fix the mount id and symlink target path issue:

• torvalds: 155e35d4da by David Howells
• torvalds: df1a085af1 by David Howells
• torvalds: f25801ee46 by David Howells
• torvalds: 4bacc9c923 by David Howells
• torvalds: 9391dd00d1 by Al Viro

Assuming that you are running Ubuntu Vivid (Linux kernel 3.19), here is how you can patch your kernel:

git clone  git://kernel.ubuntu.com/ubuntu/ubuntu-vivid.git
cd ubuntu-vivid
git remote add torvalds  git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
git remote update

git cherry-pick 155e35d4da
git cherry-pick df1a085af1
git cherry-pick f25801ee46
git cherry-pick 4bacc9c923
git cherry-pick 9391dd00d1

cp /boot/config-$(uname -r) .config
make olddefconfig
make -j 8 bzImage modules
sudo make install modules_install
sudo reboot

Async IO

If you are using a kernel older than 3.19 and your container uses AIO, you need the following AIO kernel patches from 3.19:

• torvalds: bd9b51e79c by Al Viro
• torvalds: e4a0d3e720 by Pavel Emelyanov

External Checkpoint Restore

Note: External C/R was done as proof-of-concept. Its use is highly discouraged.

Although it's not recommended, you can also learn more about using CRIU without integrating with docker: Docker_External.