Difference between revisions of "Advanced usage"
(simplify links to other articles) |
(crtools -> criu) |
||
| Line 1: | Line 1: | ||
| − | This page describes some less-than-obvious options that can be used with | + | This page describes some less-than-obvious options that can be used with criu. |
== Evasive devices == | == Evasive devices == | ||
| − | Sometimes an application opens a device file and then somehow the path by which it was opened becomes inaccessible (e.g. overmounted or unlinked). In that case | + | Sometimes an application opens a device file and then somehow the path by which it was opened becomes inaccessible (e.g. overmounted or unlinked). In that case criu cannot easily dump and restore such a process. If you consider that the path doesn't really matter when dumping your apps state you can tell criu that a device file can be opened by '''any''' name, even if the original one is no longer accessible. The option for that is <code>--evasive-devices</code> |
== External UNIX sockets == | == External UNIX sockets == | ||
| − | Consider an application opens a datagram UNIX socket and connects it to some address. If you will try to dump such app and the server socket for some reason will '''not''' be taken in the dumped state (e.g. -- a task holding it is not dumped) the dump will fail. You can override this behavior by allowing | + | Consider an application opens a datagram UNIX socket and connects it to some address. If you will try to dump such app and the server socket for some reason will '''not''' be taken in the dumped state (e.g. -- a task holding it is not dumped) the dump will fail. You can override this behavior by allowing criu to disconnect the client after dump and re-connecting it back on restore by the server socket path using the <code>--ext-unix-sk</code> option. |
For more details, see [[external UNIX socket]]. | For more details, see [[external UNIX socket]]. | ||
| Line 13: | Line 13: | ||
== Link unlinked files back == | == Link unlinked files back == | ||
| − | When an app opens a file and then unlinks it we take this file with us into image. However, we do so only if the file is ''really'' unlinked, i.e. its n_link is zero. Otherwise we cannot take file with us and should somehow open the inode. To do so we should create a temporary hardlink on it during dump, open it on restore and unlink again. The <code>--link-remap</code> option allows | + | When an app opens a file and then unlinks it we take this file with us into image. However, we do so only if the file is ''really'' unlinked, i.e. its n_link is zero. Otherwise we cannot take file with us and should somehow open the inode. To do so we should create a temporary hardlink on it during dump, open it on restore and unlink again. The <code>--link-remap</code> option allows criu to create this temporary hard links on FS. |
== TCP connections == | == TCP connections == | ||
| − | When dumping and restoring an application having an opened TCP connection you should use the <code>--tcp-established</code> option. When this option is in use | + | When dumping and restoring an application having an opened TCP connection you should use the <code>--tcp-established</code> option. When this option is in use criu will leave the connection(s) locked after dump and will require it(them) to be still locked before restore. Article [[Simple TCP pair]] describes how to play with this option. |
== Per-task logging on restore == | == Per-task logging on restore == | ||
| − | By default | + | By default criu puts all logs into one log file specified by <code>-o/--log-file</code> option. If you want to split restoration logs on per-pid basis you can use the <code>--log-pid</code> option. The <code>${pid}</code> task's logs will appear in a <code>${log-file}.pid</code> |
== Knowing a new pid of restored task == | == Knowing a new pid of restored task == | ||
| − | When you restore a process tree with <code>-n/--namespaces pid</code> option the pid of a new task will be generated by the system (since the pids sitting in image files are treated as virtual, i.e. seen in namespace ones). To find this pid out you can use the <code>--pidfile <file></code> option to make | + | When you restore a process tree with <code>-n/--namespaces pid</code> option the pid of a new task will be generated by the system (since the pids sitting in image files are treated as virtual, i.e. seen in namespace ones). To find this pid out you can use the <code>--pidfile <file></code> option to make criu put the new pid into a pidfile. |
== Restoring a veth pair of devices == | == Restoring a veth pair of devices == | ||
| − | When you restore a net namespace with a veth device end in it, | + | When you restore a net namespace with a veth device end in it, criu will create the other end of the pair in the net namespace you launch criu from. By default it's name will be the one generated by veth kernel driver. Not to scan through all the net devices trying to fine one you can use the <code>--veth-pair <ns-dev>:<host-dev></code> option. When used a device named <code><ns-dev></code> in a newly restored namespace will be linked with the <code><host-dev></code> one in the criu namespace. |
== Action scripts == | == Action scripts == | ||
| − | The ''' | + | The '''criu''' can call your hooks on various stages of dumping/restoring. These hooks are added with the <code>--action-script ''shell-code-to-execute''</code> option. When called, the <code>CRTOOLS_SCRIPT_ACTION</code> environment is set to a value determining which type of action is performed. See [[Action scripts]] for more details. |
== Shell jobs C/R == | == Shell jobs C/R == | ||
| − | When you run some app directly from shell (e.g. -- just launch top) it inherits session ID from bash and uses pty whose other end sits somewhere outside this shell session (e.g. in sshd or xterm). Strictly speaking this app cannot be checkpointed (since session leader, which is bash, is left outside the image, and so is the pty master). Nor it can be restored easily. But sometimes it might make sense to migrate such app by moving it to other session and attaching to different pty slave "on the fly". For such cases the <code>--shell-job</code> option should be used on both stages -- dump and restore. On dump it will allow | + | When you run some app directly from shell (e.g. -- just launch top) it inherits session ID from bash and uses pty whose other end sits somewhere outside this shell session (e.g. in sshd or xterm). Strictly speaking this app cannot be checkpointed (since session leader, which is bash, is left outside the image, and so is the pty master). Nor it can be restored easily. But sometimes it might make sense to migrate such app by moving it to other session and attaching to different pty slave "on the fly". For such cases the <code>--shell-job</code> option should be used on both stages -- dump and restore. On dump it will allow criu to ignore the "leaked" session leader and pty master, on restore it will tell criu to change session, group and attach to existing pty slave. |
If you want to see how it works, check [[Simple loop]]. | If you want to see how it works, check [[Simple loop]]. | ||
Revision as of 16:38, 30 April 2013
This page describes some less-than-obvious options that can be used with criu.
Evasive devices
Sometimes an application opens a device file and then somehow the path by which it was opened becomes inaccessible (e.g. overmounted or unlinked). In that case criu cannot easily dump and restore such a process. If you consider that the path doesn't really matter when dumping your apps state you can tell criu that a device file can be opened by any name, even if the original one is no longer accessible. The option for that is --evasive-devices
External UNIX sockets
Consider an application opens a datagram UNIX socket and connects it to some address. If you will try to dump such app and the server socket for some reason will not be taken in the dumped state (e.g. -- a task holding it is not dumped) the dump will fail. You can override this behavior by allowing criu to disconnect the client after dump and re-connecting it back on restore by the server socket path using the --ext-unix-sk option.
For more details, see external UNIX socket.
Link unlinked files back
When an app opens a file and then unlinks it we take this file with us into image. However, we do so only if the file is really unlinked, i.e. its n_link is zero. Otherwise we cannot take file with us and should somehow open the inode. To do so we should create a temporary hardlink on it during dump, open it on restore and unlink again. The --link-remap option allows criu to create this temporary hard links on FS.
TCP connections
When dumping and restoring an application having an opened TCP connection you should use the --tcp-established option. When this option is in use criu will leave the connection(s) locked after dump and will require it(them) to be still locked before restore. Article Simple TCP pair describes how to play with this option.
Per-task logging on restore
By default criu puts all logs into one log file specified by -o/--log-file option. If you want to split restoration logs on per-pid basis you can use the --log-pid option. The ${pid} task's logs will appear in a ${log-file}.pid
Knowing a new pid of restored task
When you restore a process tree with -n/--namespaces pid option the pid of a new task will be generated by the system (since the pids sitting in image files are treated as virtual, i.e. seen in namespace ones). To find this pid out you can use the --pidfile <file> option to make criu put the new pid into a pidfile.
Restoring a veth pair of devices
When you restore a net namespace with a veth device end in it, criu will create the other end of the pair in the net namespace you launch criu from. By default it's name will be the one generated by veth kernel driver. Not to scan through all the net devices trying to fine one you can use the --veth-pair <ns-dev>:<host-dev> option. When used a device named <ns-dev> in a newly restored namespace will be linked with the <host-dev> one in the criu namespace.
Action scripts
The criu can call your hooks on various stages of dumping/restoring. These hooks are added with the --action-script shell-code-to-execute option. When called, the CRTOOLS_SCRIPT_ACTION environment is set to a value determining which type of action is performed. See Action scripts for more details.
Shell jobs C/R
When you run some app directly from shell (e.g. -- just launch top) it inherits session ID from bash and uses pty whose other end sits somewhere outside this shell session (e.g. in sshd or xterm). Strictly speaking this app cannot be checkpointed (since session leader, which is bash, is left outside the image, and so is the pty master). Nor it can be restored easily. But sometimes it might make sense to migrate such app by moving it to other session and attaching to different pty slave "on the fly". For such cases the --shell-job option should be used on both stages -- dump and restore. On dump it will allow criu to ignore the "leaked" session leader and pty master, on restore it will tell criu to change session, group and attach to existing pty slave.
If you want to see how it works, check Simple loop.
File locks C/R
Some app may use file locks for synchronization. Generally they will use flock or posix file locks, which were achieved by flock or fcntl system calls. For dump/restore, it is hard to be handled perfectly, because we can't guarantee all potential users are dumped for a specific file lock. Right now, we assume that all file lock users are taken into dump, and we should use the --file-locks option on both dump and restore stages if our app may use any file locks. Remember that file locks dump/restore is only safe for container dumping in theory.